Suction Filters - Nylon Type G


Material: Support Nylon / Stainless Steel Mesh

Size: Ø60 H 62mm / Ø56 H 50mm / Ø46 H 46mm / Ø42 H 48mm

Apply for: different suction systems.


Model

 

Suction filter 10 / 15 / 30 mesh Thread 1″

Suction filter 10 / 15 / 30 mesh Thread 1/2″

Suction filter 10 / 15 / 30 mesh Thread 3/4″

Suction filter 10 / 15 / 30 mesh Thread 28 x 1,5 mm

Suction filter 10 / 15 / 30 mesh Thread 7/8″

 

Using filters prevents dirt or contaminants from making their way through the spray system. They minimize possible tip clogs and optimise the quality of your finish.

In a standard airless system, the paint passes through 3 filters before atomisation: inlet screen, pump filter and the gun filter. The first filter is the biggest, the last one, the smallest.

The size of the filter is defined by their number of mesh. The more mesh, the more the material will be filtered.
It is advised to use a smaller filter with less viscous materials (100 mesh) and a larger filter (60 mesh) with thicker materials such as latex paints.

 

Manifold Filters filter the paint once more before it enters the hose. Not having the manifold filter can cause damage to your gun and may puncture your hose.

 

If you are unsure what Filter you need, Please email us to discuss.

Previous :Stainless Steel Suction Filters      Next : none
leave your message